You'll always want to follow the specs that are listed directly on the tires themselves. It sounds like you've got the Loadstar ST185/80D13 Bias Trailer Tire - Load Range D # AM1ST79, which are designed to be run at 65psi and have a capacity of 1710-lbs per tire; these tires are well rated for a camper that has a GVWR of almost 2000-lbs, so you've got nothing to worry about. view full answer...
Hey Ron, yes the Dexter lift kit part # K71-707-01 that you referenced does fit the Torflex axle you have on your 2017 A-Liner Scout. view full answer...
We can't recommend the use of the Bulldog wheel caster with the Ultimate Trailer Jack # 322-RDJ-2K. The only one that can be used is the # JC-102 which is a confirmed fit. view full answer...
As your 2012 Aliner Expedition has a GVWR of 3,500lbs you most likely have the standard #84 spindle which will use the Bearing Kit # BK2-100. If you can find the axle tag or serial number stamped on your axle I can confirm this is what you have with the axle manufacturer. Otherwise you might pull one of your hubs apart to verify you have the following bearings and grease seals.
Inner Bearing # L68149(Inner Diameter 1.378")
Outer Bearing # L44649(Inner Diameter 1.063")
Grease Seal # 58846(Inner... view full answer...
While we do not carry tail lights that are explicitly designed for your 2014 Aliner Scout Camper, we carry a wide variety of tail lights, so I'm sure we have something for you.
I've linked to a list of our lights below for you to narrow down what would work best for you. You can use the filters to determine what matches your current lights. For example, the Triple LED Trailer Tail Light, part # CE44VR, is a rectangle light with red and white lights and stop, turn, tail, and backup light... view full answer...